Atdec Telehook TH-1026-CT Installation manual Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour la télévision Atdec Telehook TH-1026-CT Installation manual. Atdec Telehook TH-1026-CT Installation manual User Manual [fr] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Component Checklist
Coach Screw (x4)
Nylon Anchor (x4)
Washer 8.5mm(x6)
Washer 4.5mm(x4)
3mm Allen Key
M4x12mm/20mm
M5x12mm/20mm
Installation Instructions
TH-1026-CT
Ceiling Tilt Mount
IMPORTANT INFORMATION:
Step 1. Check Components
! IMPORTANT - Install Telehook 1026 Ceiling Tilt Mount per Installation Instructions.
! This product supports a maximum load of 15kg (33lbs).
! This product supports VESA mounting hole configurations 75x75mm and 100x100mm.
! The manufacturer accepts no responsibility for incorrect installation.
Display Mounting
Screw (x4 each)
Hardware
Tools Required:
Power drill
4.5mm (0.18”) drill bit
10mm (0.39”) masonry drill bit
Phillips head screw driver
12mm (0.47”) socket wrench or shifter
Step 2. Slide Ceiling Mount
Upper Pole Lower Pole Screen Mount
Ceiling Mount
Upper Pole Bush
Timber Stud CeilingMasonry Ceiling
Hex-Head Screw
M8x55mm (x2)
Nyloc Hex Nut (x2)
SLIDE INSERT
Ceiling Mount
Upper Pole
Upper Pole Bush
Upper Pole
Insert Bush to the Upper Pole.
Set Screw (x3)
Set Screw
Step 3. Fix Upper Pole
Check you have received all parts against the Component Checklist and Hardware above.
Step 4. Insert Bush
Slide Ceiling Mount on to the Upper
Pole.
Drilled Hole
Nylon Anchor
Ceiling Mount
Washer 8.5mm
Coach Screw
Ceiling Mount
Washer 8.5mm
Coach Screw
- Drill four 10mm (0.39”) diameter holes, 61mm (2.4”) deep.
- Secure the mounting plate to the ceiling using the Coach
Screws and Nylon Anchors supplied.
- Drill two 4.5mm (0.18”) diameter holes, 61mm (2.4”) deep.
- Secure the mounting plate to the ceiling using the Coach
Screws supplied.
NOTE: Use a stud finder to accurately locate the centre
of the stud. Ensure that all screws fix securely into stud.
Fix Upper Pole to Ceiling Mount with
three Set Screws. Tighten using supplied
Allen Key.
M5x6mm
Security Screw
Step 5. Install Ceiling Mount to the Ceiling
OR
Drilled Hole
13mm (0.51”) socket wrench or shifter
J
F
H
GL
E,I
KM
A
B
CD
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Installation Instructions

Component ChecklistCoach Screw (x4)Nylon Anchor (x4)Washer 8.5mm(x6)Washer 4.5mm(x4)3mm Allen KeyM4x12mm/20mm M5x12mm/20mmInstallation InstructionsTH-

Page 2 - Installation Complete

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent Atdec Pty Ltd.Due to c

Commentaires sur ces manuels

Pas de commentaire